Avanti J-26S XP 高速冷凍離心機
Avanti J-26S XP 高速冷凍離心機結合了高性能，持久耐用性以及完整的安全操作系統，使其成為多種實驗室環境中合適的選擇。可體驗簡化的高通量樣品採集流程以及更多強大功能的控制程序配置，包括：
- 自動轉子識別
- 低熱量輸出
- 不平衡耐受性
- 低噪性能
- 人體工學設計特色
產品名稱：高速冷凍離心機 生產企業：貝克曼庫爾特（美國）股份有限公司 Beckman Coulter,Inc.
*僅供醫療衛生專業人士參考
*禁忌內容或者注意事項詳見說明書
Resources + Tools
功能特點
用於簡化高通量樣本處理以及更多的實驗掌控！關鍵功能包括不平衡耐受性，低噪性能，低溫運行。
多功能應用
- 以 81,800 x g 相對離心力進行亞細胞的分離
- 一次運行 24 個微孔盤
- 用淘洗轉頭分離活細胞群
操作安全性升級
- 抗衝擊蓋
- 全封閉屏障
- 配置不平衡探測器實時監控系統以保持實驗穩定進行
樣品保護升級
- 自動檢測安裝的轉子
- 防止轉子在最大限定速度以上運行，同時保持正常運行
最佳化細胞分離
- 利用 Avanti J-26S XP 高速冷凍離心機進行淘洗
- 通過淘洗轉子分離和/或濃縮單細胞或顆粒的單分散懸浮液
Explore Avanti J-26S Series Models
Related Parts for Avanti J-26S
JA-12 Fixed-Angle Aluminum Rotor, Biosafety Lid- 12 x 50 mL, 12,000 rpm, 23,200 x g
The JA-12 fixed angle rotor, rated for 12,000 RPM, is designed to hold up to twelve 50-mL tubes at a 35-degree angle (see Figure 1). Used in Beckman Coulter J2 and Avanti® J series centrifuges, the JA-12 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and sub-cellular fractions, and do phase separation and binding studies.
JA-14.50 Fixed-Angle Aluminum Rotor, Biosafe, 16 x 50 mL conical, 14,000 rpm, 35,000 x g
16 x 50 ml conical rotor , 14.000 rpm, 35.000 x g
JA-14.50 Fixed-Angle Aluminum Rotor, 16 x 50 mL conical, 14,000 rpm, 35,000 x g
The JA-14.50 fixed-angle rotor is designed to hold up to sixteen 50-mL conical tubes at a 35-degree angle. Used in Beckman Coulter Avanti J series centrifuges, the JA-14.50 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and subcellular fractions, and do phase separation and binding studies.
JA-25.15 Fixed-Angle Rotor, Aluminum, 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.15 Fixed-Angle Aluminum Rotor- 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.50 Fixed-Angle Rotor- Aluminum, 8 x 50 mL, 25,000 rpm, 75,600 x g
JA-25.50 Fixed-Angle Rotor with Single Lock Lid, Aluminum. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series and J2 Series centrifuges.
JA-25.50 Fixed-Angle Aluminum Rotor, Biosafety Lid- 8 x 50 mL, 25,000 rpm, 75,600 x g
The JA-25.50 fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-25.50 rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates.
JA-30.50 Ti Fixed-Angle Titanium Rotor, Biosafety Lid- 8 x 50 mL, 30,000 rpm, 108,860 x g
The JA-30.50 Ti fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-30.50 Ti rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates. Short column methods (i.e., partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient.
JA-30.50 Ti Fixed-Angle Titanium Rotor, Single Lock Lid- 8 x 50 mL, 30,000 rpm, 108,860 x g
The JA-30.50 Ti fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-30.50 Ti rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates. Short column methods (i.e., partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient.
J-LITE(R) JLA-16.250 Fixed-Angle Aluminum Rotor, Single Lock- 6x250mL, 16,000 rpm, 38,400 x g
Major applications: General purpose, large-volume and multitube processing. Lightweight alternative to conventional 6x 250 rotors; empty rotor weight is 10.3 kg (22.7 lb). For use in Avanti J Series and J2 Series centrifuges.
JA-10 Fixed-Angle Aluminum Rotor- 6 x 500 mL, 10,000 rpm, 17,700 x g
JA-10 Fixed-Angle Rotor, Aluminum; Includes carrying handle. Major applications: Large-volume for initial processing of tissue homogenates and other large particles. For use in Avanti J Series and J2 Series centrifuges.
JA-14 Fixed-Angle Aluminum Rotor, Biosafety Lid- 6 x 250 mL, 14,000 rpm, 30,100 x g
JA-14 Fixed-Angle Rotor, Aluminum; Major applications: General-purpose, large-volume and multi-tube processing. Adapters permit use of up to 30 each 15-mL tubes and up to 72 each 3-mL tubes. For use in Avanti® J Series and J2 Series centrifuges.
Technical Documents
Didn't find what you are looking for? For more results click
here.
